unarchive In The Box of 5.5124 keyboard_arrow_down
- 8 15.03.23.39 Washers (0.702x0.402x0.090)
- 8 8095G End Link Bushings
- 2 15.08.16.39 Brackets
- 2 15.05.07.39 Coarse Grade 5 Bolt
- 2 15.07.01.40 Nylon Nut
- 2 15.10.47.39 Metal Sleeves (.562 x .375 x 4.500)
- 2 5354 32mm Sway bar bushings
- 1 17145 Instruction sheet
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 5.5124 | Front Sway Bar Bushings-Endlinks - 32 mm | Ram 1500
- 5 Star (6)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 5.5124
starstarstarstarstar" Review 2 Years Later "
No issues, these are an easy install, I purchased extra grease for the installation. This truck is heavy with a 5.9L Cummins. No squeaking, no noise and a better than OEM feel. These were installed during a complete front suspension rebuild at 300K miles. All ball joints, tie rod ends, pitman arms and control arm bushings. All bushings were replaced with polyurethane bushings, all boots were replace with polyurethane boots. No issues two years later.
verified_user Verified Buyer - Kris Molloy - . Energy Suspension 5.5124 - 5 out of 5starstarstarstarstar" Love them "
Very easy to install!!
verified_user Verified Buyer - Thomas Heal, kry1998 - . Energy Suspension 5.5124 - 5 out of 5starstarstarstarstar" Everything was easy as pie "
Nice quality product, lived up to the hype of Energy Suspension's name!
verified_user Verified Buyer - Michael Ashley Crisp - . Energy Suspension 5.5124 - 5 out of 5starstarstarstarstar" Great product at a very affordable price "
Quick shipment, great quality product, no fitment issues, great price point!
verified_user Verified Buyer - Bruce B. Niccolai - . Energy Suspension 5.5124 - 5 out of 5