unarchive In The Box of papls466 keyboard_arrow_down
- Gap Guard
- 1 Qty - Driver front gap guard (1)
- 1 Qty - Passenger front gap guard (2)
- 1 Qty - Driver rear gap guard (3)
- 1 Qty - Passenger rear gap guard (4)
- 1 Qty - Package plastic clip fastener
- 5093
- 4 Qty - 3x3 blocks
- 10Qty - 3x2 blocks
- 4 Qty - 3x2 overload pads
- 2 Qty - Front bumper brackets
- 1 Qty - 5/8in x 18in vent hose
- 1 Qty - 10ml bottle Loctite 262
- Bolt Pack
- 8 Qty - 1/2in x 4 1/2in bolts
- 6 Qty - 3/8in x 6in bolts
- 16Qty - 1/2in USS washers
- 8 Qty - 1/2in nylock nuts
- 6 Qty - 3/8in nylock nuts
- 1 Qty - Shift extension pin (5093 only)
- 1 Qty - Transfer case linkage extension
- (5093 only)
- Hardware Pack
- 4 Qty - 7/16in x 1in bolt
- 4 Qty - 7/16in nylock nuts
- 4 Qty - 1/4in nylock nuts
- 6 Qty - 3/8in USS washers
- 8 Qty - 7/16in SAE washers
- 4 Qty - 1/4in SAE washers
- 4 Qty - 1/2in x 3in radiator spacers with studs
- 2 Qty - #10 hose clamps
- 4 Qty - 8mm x 20mm sheet metal screws
- 2 Qty - 1/8in Roll pins
- 5603
- 8 Qty - Block, 2in x 3in spacer
- 4 Qty - Block, 3in x 3in spacer
- 7 Qty - Bolt, 1/4in-20 x 1in
- 6 Qty - Bolt, 3/8in-16 x 1in
- 2 Qty - Bolt, 3/8in-16 x 8in
- 1 Qty - Bolt, 3/8in-24 x 1-1/4in, socket head
- 4 Qty - Bolt, M12-1.25 x 160mm
- 2 Qty - Bolt, M12-1.25 x 180mm
- 2 Qty - Bolt, M12-1.25 x 210mm
- 2 Qty - Bolt, M12-1.75 x 200mm
- 1 Qty - Bracket, 2in stand off
- 2 Qty - Bracket, 2in Z-shaped
- 7 Qty - Bracket, 3in radiator w/ stud
- 2 Qty - Bracket, 3in Z-shaped
- 1 Qty - Bracket, front bumper, driver
- 1 Qty - Bracket, front bumper, passenger
- 1 Qty - Bracket, rear bumper, driver
- 1 Qty - Bracket, rear bumper, passenger
- 4 Qty - Clamp, #10 hose
- 2 Qty - Clamp, #20 hose
- 4 Qty - Clamp, #6 hose
- 4 Qty - Clip, push
- 1 Qty - Extension, 1in x 6in rubber hose
- 1 Qty - Extension, 1/4in x 6in rubber hose
- 1 Qty - Extension, 5/8in OD x 5in L metal
- 1 Qty - Extension, 5/8in x 3in manual shifter
- 1 Qty - Extension, 5/8in x 6in rubber hose
- 1 Qty - Extension, 7/16in OD x 5in L metal
- 1 Qty - Extension, steering
- 1 Qty - Loctite, 6mL tube
- 13Qty - Nut, 1/4in-20 Nylock
- 2 Qty - Nut, 12mm Nylock
- 8 Qty - Nut, 3/8in-16 Nylock
- 1 Qty - Plate, radiator block off, driver
- 1 Qty - Plate, radiator block off, passenger
- 4 Qty - Tie, zip
- 24Qty - Washer, 1/4in SAE
- 12Qty - Washer, 3/8in USS
- NPA PLS466
- Body Lift Kit. PART NUMBER 5603/5609
- Leveling Kit. PART NUMBER TL227PA
- Urethane Gap Guard kit. PART NUMBER 6337
lock Warranty Information keyboard_arrow_down
- Lifetime Warranty - All of Performance Accessories Parts are backed by a Lifetime Warranty. They note that: It is unlikely that you will experience a problem with a Performance Accessories product, but if you do, we will replace the part free of charge.
Performance Accessories' Body Lift Kits
Daystar's Body Lift Kits are the perfect solution for any clearance issues on your truck or SUV. A body lift differs from a full suspension lift. A full suspension lift lifts just that, the full suspension, but a body lift is a more cost effective way to create clearance for your larger tires.


Low Center of Gravity
By lifting on the body, the center of gravity for your vehicle remains lower to the ground. With a low center of gravity, your vehicle's maneuverability and speed are maintained unlike with a full suspension lift. Daystar's Body Lifts are covered with a lifetime warranty and are available from DST today!

