Daystar Universal Bump Stops
Daystar's Polyurethane Bump Stops stand between your frame and your suspension components to keep them from banging into each other when your vehicle tries to bottom out. Covered by a Lifetime Warranty.
Whether you're tackling a trail in your Jeep, or traversing a washed out pasture in your truck, there will be times that your vehicle is going to want to bottom out. This can cause damage as your frame slams down onto your axle or control arms and in extreme cases could break some components and leave you stranded. To make sure your suspension stays safe through big bumps or long drops Daystar's bump stops provide a strong buffer between the frame and suspension.
Polyurethane is a tough material that will give a little to hard pressure but will keep it's shape better than rubber, which is also used for bump stops. Daystar offers a variety of bump stop types including low profile bump stops, progressive rate bump stops, bump stops for application specific projects, and even bump stops for universal applications. So check out the poly bump stops below and keep your suspension safe!
Image | Part Number | Part Type | Dimensions |
---|---|---|---|
Bulk m02319 | Progressive Rate - Mounting Plate | Wide Slotted Competition Style Bump Stop (3 Inch tall. 4-1/2 Inch long. 2-1/2 Inch) | |
KJ09101BK | OEM Style | N/A | |
KJ09114BK | OEM Style | 5.05 Inch (128.27mm) Long, 1.8 Inch (45.72mm) Smallest Diameter, 2.01 Inch (51.054mm) Larger Diameter | |
KJ09122BK | OEM Style | 4 Inch (101.6mm) Tall, 3.4 Inch (86.36mm) Long, 1.8 (45.72mm) Wide | |
KJ09120BK | OEM Style | N/A | |
KJ09121BK | OEM Style | N/A | |
KU09006BK | Cone - Stepped | 2 1/8 Inch (53.97mm) Tall, 1 15/16 Inch (49.21mm) Diameter | |
KU09007BK | Button | 11/16 Inch (17.46mm) Tall, 2 1/32 Inch (51.59mm) Diameter | |
KU09008BK | Cone | 1 9/16 Inch (39.68mm) Tall, 1 1/2 (38.10mm) Inch Diameter | |
KU09009BK | Progressive Rate - Single Stud | 4 1/2 Inch (114.30mm) Tall, 4 1/2 Inch (114.30mm) Long, and 2 1/2 Inch (63.50mm) Wide | |
KU09014BK | Progressive Rate - Single Stud | 3 Inch (76.20mm) Tall, 4 1/2 Inch (114.30mm) Long, and 2 1/2 Inch (63.50mm) Wide | |
KU09016BK | Progressive Rate - Mounting Plate | 4 1/2 Inch (114.30mm) Tall, 4 1/2 Inch (114.30mm) Long, and 2 1/2 Inch (63.50mm) Wide | |
KU09017BK | Progressive Rate - Mounting Plate | 3 Inch (76.20mm) Tall, 4 1/2 Inch (114.30mm) Long, and 2 1/2 Inch (63.50mm) Wide | |
KU09018BK | OEM Style | 5 1/2 Inch (139.70mm) Tall | |
KU09022BK | OEM Style | 3 1/2 (88.90mm) Inch Tall | |
KU09036BK | Wedge | 2 1/4 (57.15mm) Inch Tall, 3 Inch (76.20mm) Long, and 2 Inch (50.80mm) Wide | |
KU09037BK | Extended Bump Stop - Single Stud | N/A | |
KU09038BK | Button | 1 Inch (25.40mm) Tall, 2 Inch (50.80mm) Diameter, 10mm (0.393 Inch) Thread | |
KU09041BK | Button | 1 3/8 Inch (34.92mm) Tall, 2 1/2 Inch (63.50mm) Diameter | |
KU71088BK | Stinger | Long, Single, 11.25" ext. x 7" col. | |
KU71089BK | Stinger | Short, Single, 8.25" ext. x 5.5" col. | |
KU71090BK | Stinger | Long, Pair, 11.25" ext. x 7" col. | |
KU71091BK | Stinger | Short, Pair, 8.25" ext. x 5.5" col. | |
KU70115ST | Stinger | Stinger Bump Stop 2.0 Mounting Can | |
KU71093 | Stinger | Stinger Bump Stop Foam Rebuild Kit | |
KU71103 | Stinger | Stinger Bump Stop Poly Rebuild Kit | |
KU71092 | Stinger | Stinger Bump Stop Mount - Weld-On |